焊接工藝評定簡介
焊接工藝評定（Welding Procedure Qualification，簡稱WPQ) 為驗證所擬定的焊件焊接工藝的正確性而進行的試驗過程及結果評價。
焊接工藝評定目的
1.評定施焊單位是否有能力焊出符合相關國家或行業標準、技術規范所要求的焊接接頭；
2.驗證施焊單位所擬訂的焊接工藝規程（WPS或pWPS）是否正確。
3.為制定正式的焊接工藝指導書或焊接工藝卡提供可靠的技術依據。
歐盟焊接工藝評定適用范圍
1、適用于鍋爐，壓力容器，壓力管道，橋梁，船舶，航天器，核能以及承重鋼結構等鋼制設備的制造、安裝、檢修工作；
2、適用于氣焊，焊條電弧焊，鎢極氬弧焊，熔化極氣體保護焊，埋弧焊，等離子弧焊，電渣焊等焊接方法
歐盟焊接工藝評定標準
EN ISO 15614-1:2004/A2:2012-鋼、鎳及鎳合金的焊接工藝評定
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN ISO 15614-2:2005/AC:2009-鋁及鋁合金的焊接工藝評定
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys
EN ISO 15614-4:2005/AC:2007 -鑄鐵的焊接工藝評定
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings
EN ISO 15614-5:2004 -鈦/鋯及其合金的焊接工藝評定
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys
EN ISO 15614-6:2006-銅及銅合金的焊接工藝評定
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys
EN ISO 15614-7:2007 -堆焊的焊接工藝評定
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding
EN ISO 15614-8:2002-金屬材料焊接程序的規范和鑒定
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints
EN ISO 15614-11:2002 -電子束/激光焊的焊接工藝評定
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding
EN ISO 15620:2000 -焊接.金屬材料摩擦焊接
Welding - Friction welding of metallic materials
|